The standard builder cut out for medicine cabinets is 14”w x 18”h x 4"d.
VanityPerfect^® will fit perfectly in to that space. 

Whether you are replacing your current medicine cabinet or installing VanityPerfect^® in new construction, the cabinet has been pre-drilled and it takes just four screws (provided) to install the cabinet in to the studs. 

VanityPerfect^® will install on any side wall and open the correct way with no hardware modifications required. Because of the unique design just install the unit with the hinge away from you, it works the same on either side.

When installing, keep the packaging tape on the mirror until installation is complete so the mirror does not swing during installation.

Place a level on the top of the VanityPerfect^® during installation. This will ensure the cabinet doors open and close only when you want them to.

Once the cabinet is installed, insert the shelving pins provided in the desired locations inside the cabinet. Install the shelves at an angle and gently lower them on top of the shelving pins.
Close the door and remove the tape from the mirror and VanityPerfect^® is ready to use.

Special Note:
OPEN ONE DOOR AT A TIME

• If you are accessing the inside of the medicine cabinet keep the mirror closed.
• If you are using the mirror in the open position, keep the framed door closed.

VanityPerfect^®